COMPLETE TERRY DYEING & FINISHING PLANT

 

Babcock Stenter  Type 5000-5800.Year 1990 ,8 chambers,300cm max. width.

Horizontal return pin chain (originally pin/clip)

Entry with Heinz Hergeth Pol Rotor Type PH D GF 300

Mahlo weft straightener Type RF MD 76 aS

Stenter entry with operator platform,high control gantry .

Entry zone 3mts with E+ L uncurlers & photocell edge guiders.

8 Thermostatically controlled bays. All fans are 2/speed ,maximum working temperature of 220⁰C

Exit zone 3mts with cooling unit,web slitting unit.

Additional equipment,4 Pyrometers,PLEVA Moisture Monitor/speed controller.

front and rear monitoring cameras and screens. The maximum operating speed is 150m/min.

 

2 Franz Muller Shearing (Cropping) machinesType: PPS32 .Max working width 2000mm

Kusters Pad Mangle

Type: 222.53 - 3000

Equipped with a Zollig batchwinder working width of 3000mm

 

ATYC Hydro extractor

Type: CRF-1500,Year:1992

Equipped  with unloader, 180Kg maximum capacity 

Anglada Turbang System Relax Dryer

2 Compartments,Steam heated,1800mm working width, plaiter exit 

HIGH TEMP SOFTFLOW DYEING MACHINES.

A24 7874/1

1.  ATYC HT Jet. Year 2003

Overflow HT 2 Capacity 2 x 250 kg chambers

Max Temperature 135°C

 

 

2. ATYC HT Jet. Year 2004

Machine Type Overflow HT 2

Capacity 2 x 250 kg chambers

Max Temperature 135°C

 

 

3. ATYC HT Jet. Year 2003

Machine Type Overflow HT 2

Capacity 2 x 250 kg chambers

Max Temperature 135°C

 

 

4. ATYC HT Jet. Year 2004

  Machine Type Overflow HT FP1 RS

Capacity 1 x 250 kg chambers

Max Temperature 135°C

 

 

5. ATYC HT Jet. Year 2004

Machine Type Overflow HT FP1 RS

Capacity 1 x 250 kg chambers

Max Temperature 135°C

 

Each Jet has 200 mm Jet diameter, low pressure with high flow circulation pump, filter system, pump assisted rapid drain capability .

1 addition tank, 1 bath preparation tank ,allows the next bath to be prepared while the current dyeing process is running reducing processing time,.

Low liquor ratio processing and Arel APC 504 controller.

 

ATMOSPHERIC TEMPERATURE SOFTFLOW DYEING MACHINES.

 

 

2  ATYC Atmospheric Jets,Type: BT-3FL 450,Year 1992

3 chambers atmospheric jet dyeing machine for heavy weight terry towelling fabric.

Each chamber can hold up to 133Kg ,total capacity of 400Kg.

Equipped with,unloading winch,heat exchanger & filter,main motor + pump.

1 addition tank .Electrical panel with  Arel 304+ controller. 

 

 

Fong Atmospheric Jet,Type: GN9-100-2T,Year:1998

Fong 2 chambers atmospheric jet dyeing machine for heavy weight terry towelling fabric.

Each chamber can hold up to 180Kg ,total capacity of 360Kg.

Equipped with,unloading winch,heat exchanger & filter,main motor + pump.

1 addition tank .Electrical panel with  Arel 304+ controller

 

 

2 Fong Atmospheric Jets,Type: GN9-100-4TYear:1998

4 chambers suitable for heavy weight terry towelling fabric.

Each chamber can hold up to 180Kg ,total capacity 720Kg.

Equipped with,unloading winch,heat exchanger & filter,main motor + pump.

1 addition tank .Electrical panel with  Arel 304+ controller

 

 

ATYC Atmospheric Jet,Type: BT.DUPLEX 4F.X,Year:1988

4 chambers atmospheric jet dyeing machine suitable for heavy weight terry towelling fabric.

Each chamber can hold up to 90Kg ,total capacity of 360Kg.

Equipped with,unloading winch,heat exchanger & filter,main motor + pump.

1 addition tank .Electrical panel with  Arel 304+ controller 

Arel On Time Volumetric Chemical Dispenser (OTD), 24 chemicals

Arel On Time Volumetric Chemical Dispenser (OTD)  automatic dispensing system for liquid chemicals. The system measures the required quantity of liquid chemicals specified in the dyeing recipe and automatically delivers the measured chemical to the specified dyeing machine at the specified time.

The system combines a high capacity, variable speed lobe pump, a flow regulating device and a high precision flow meter with an Arel PC based control system for fully automatic and reliable operation.

A common distribution line with 3-way valves directs the chemicals to each dyeing machine. The lines are flushed with air prior to each dispensing cycle resulting in the need for minimal rinse water.

A unique algorithm controls the variable speed dosing pump and flow regulating valve enabling fast dispensing with high accuracy and turbulent rinsing ensures thorough cleaning of the system for each subsequent dispense.

TEXPA Cross Cut and Hem installation for terry .Year: 2000

The Texpa cross cut and hem installation for terry fabric is a high output yet flexible automatic chain

stitch cross hemming machine. It produces a minimum 12 mm up to a maximum 40 mm end hem and will

process towels from a minimum width of 300 mm to a maximum width of 1800 mm and a minimum length of

300 mm to a maximum length of 2400 mm. It is also equipped with an automatic roll feed loop label insertion mechanism.

 

 

SCHMALEDURATE 510

2 x Long hemming machines for terry fabric, table linen, dishtowels, napkins and much more. Aligning, edge trimming, hem formation and sewing.

 

 

 

SCHMALEDURATE 660 automatic cross hemming machine

2 x Automatic cross hemming machine for terry fabric, table linen, dishtowels, napkins and much. Alignment of the fabric webs, dimensioning, fitting with labels, hemming and sewing with breathtaking speed.

 

 

Ref. No. BPMB618107