Bin Emptier Temafa Ww 3.000 Mm - 1982
1 Complete Semiworsted Spinning Line

1 Bin Emptier TEMAFA, 1982, ww 3.000 mm, high 3.000 mm, with 2 bins 17,5 m length, 4 m high, side walls made out of laminated woodden plates, feeding cyclons, sliding door

1 Bin Emptier TEMAFA, 1982, ww 3.000 mm, high 3.000 mm, with 2 bins 17,5 m length, 4 m high, side walls made out of laminated woodden plates, feeding cyclons, sliding door

1 Card HDB Galaxy, 1980, ww. 2500 mm, with shutfeeder Temafa ca. 4 m high and hopper-feeder, volumetric feeding, Servolap-control HDB, breast section with 4 pairs worker/stripper, main-cylinder diameter 1270 mm, 3 pairs worker/stripper, 2 doffers diameter 600 mm, delivery 4 slivers in 2 drawing heads, with 3-roller drafting zone, delivery in 2 coilers, automatic can changer, cans dia. 1000 x 1200 mm high, 380V/50HZ, production 300-500 kg/h

1 Gillbox Line NSC Schlumberger 1984, Speed 250-300 M/Min., Production 250-300 kg/H constisting of:
1. passage GC12R autoleveller, feeding 2 x 5 = 10 cans dia. 1000 x 1200 mm, delivery
1 sliver in 1 can dia. 1000 x 1200 mm, automatic canchanger, oiling device for avivage
2. passage GC12, feeding 2 x 5 = 10 cans dia. 1000 x 1200 mm, delivery 1 sliver in 1 can dia. 1000 x 1200 mm, automatic canchanger,
3.passage GC12, feeding 2 x 5 = 10 cans dia. 1000 x 1200 mm, delivery 2 slivers in 2 cans dia. 600 x 1200 mm, automatic canchanger

2 Cards HDB Type Record, 1970 And 1973, ww 1.800 mm, with shutfeeder Temafa ca. 4 m high and hopperfeeder, volumetric feeding, breast section, with 3 pairs worker/stripper, main-cylinder dia. 800 mm, 3 pairs worker/stripper, 1 doffer dia. 800 mm, unflexible wire very good condition, delivery 1 sliver in 1 drawing head, with 3-roller-drafting zone, 1 sliver in 1 coiler, automatic canchanger, cans dia. 1000 x 1200 mm high, 380V/50Hz, production 150-200 kg/h
Machines are complete on floor in running condition.

1 Gillbox Line NSC Schlumberger 1981, Speed 250-300 m/min. Production 250-300 kg/h, consisting of:
1. passage GC12R autoleveller, feeding 2 x 5 = 10 cans dia. 1000 x 1200 mm, delivery
1 sliver in 1 can dia. 1000 x 1200 mm, automatic canchanger, oiling device for avivage
2. passage GC12, feeding 2 x 5 = 10 cans dia. 1000 x 1200 mm, delivery 1 sliver in 1 can dia. 1000 x 1200 mm, automatic canchanger,
3.passage GC12, feeding 2 x 5 = 10 cans dia. 1000 x 1200 mm, delivery 2 slivers in 2 cans dia. 600 x 1200 mm, automatic canchanger

1 Gillbox, NSC, 1974, GN5, feeding: 10 cans, delivery: 2 slivers in 2 cans diam. 600 x 1.200 mm

1 Semiworsted Ringspinning Frame NSC, 1991, Type CF43, 204 spindles, pitch 120 mm,ringdia. 90 mm, tubes 400 mm, speed 2.-5.500 tpm, for yarn count Nm 3-12, 2 drafting zones NSC for direct spinning out of cans, automatic doffer, creel for cans dia. 600 mm x 1200 mm, overhead cleaner, for yarn count Nm 3-12, 3-5 kg,
linked with

Winder KARL MAYER, 1991, type RC10 ADW/VD, 24 spindles, 10