Type Make Model Qty YOM

Pre-cleaner
Rieter Model Uniclean B11 Qty 1 YOM 2000

Fine cleaner
Rieter Model Uniflex B 60 Qty 2 YOM 2006

Dozing opener
Truetzschler Model FD-S 1600 Qty 1 YOM 2006

Cards with IDF
Truetzschler TC-03/IDF Qty 11 YOM 2006

Cards with IDF
Truetzschler TC-07/IDF Qty 1 YOM 2010

Autoleveller draw frames
Truetzschler TD-03 Qty 4 YOM 2006/10

Semi-automatic OE spinning frame 288 spin boxes each
Saurer Czech (Oerlikon Schlafhorst) BD-330 Qty 11 YOM 2006

Semi-automatic OE spinning frame 288 spin boxes each
Saurer Czech (Oerlikon Schlafhorst) BD-350 Fancynation Qty 1 YOM 2006

Filter Luwa Qty 1 YOM 2008

Details
Pre-cleaner
Rieter Uniclean ? 11 YOM 2000 1 nos.
Serial no. 40000110-00162

Fine cleaner
Rieter Uniflex B 60 YOM 2006 2 nos.
Serial no. 40006240-00142
Cans dia. 400 mm. ht. 920 mm.

Feeder-hopper
Truetzschler FD-S 1600 YOM 2006 1 nos.
FD-S 1600 Serial no. 2501004 113038 YOM 2006
FD-U 1600 Serial no. 9251002 121202 YOM 2007

Cards with IDF
TC-03/IDF YOM 2006 11 nos.
Card Serial nos. DFK 5630701-113040 A, B,C,D,E,F
IDF: 8110003-196396; 811003-101051A,B,C;; 8110004-113044 A,B,C,D,E,F

High capacity cards
??-03
Capacity 150Kgs./Hr.
Power rating 16.24kW
Compressed air consumption 14litres/hr.
Integrated feeder DIRECTFEED,
Integrated SENSOFEED,
Preopener WEBFEED with 3 opening rollers
Knife adjustment system PMS
Aluminium flats
Flats adjustment system PFS
Multipurpose packet of intensive cleaning MULTIWEBCLEAN
WEBSPEED
Centralized suctions system with control unit
microprocessor control with touch screen operation
steel Long Life Wire
automatic can changer for cans dia. 600/900/1000 mm., ht. 1500 mm. max.

Integrated draw frame IDF
2 zone drafting with autolevelling
pneumatic tension on top rollers
Continuous quality control (count, evenness, spectrogram, thicks).
Drafting 3x
3 over 3 drafting self exhaust
Power rating 2.7kW

Extras:
Flat removal tools TC-SF
Nepcontrol TC-NCT and connecting pack TC-IK with software

Cards with IDF
TC-07/IDF YOM 2008 1 nos.
Serial nos. Card VOR.FBK 9430016 126889A 9108180363
IDF: 8110004-126893A

High capacity cards
??-07
Capacity 180Kgs./Hr.
Power rating 16.24kW
Digital servo motors with continuously variable flat speed
WEBSPEED
Aluminium flats CLASSIC TOP
Data transfer with CF cards
Interface TKN
Autolevelling DFK
Longwave CCD regulator
Integrated SENSOFEED with autolevelling and thick detection
Preopener WEBFEED with 3 opening rollers
Needle roller for pre-opening
Precision knife position control TC-PMS
Multipurpose packet of intensive cleaning MULTIWEBCLEAN
Long-life carding wire TC-LLC TCC NOVOSTAR
Flat control TC-PFS
Twin-drive doffing
Continuous waste removal
Waste removal at bottom
Freely opening cover with windows
Big colour monitor
Coiler TC-CM for cans dia. 600/900/1000 mm.
Metal detector TC-MD at exit
Enhanced quality control TC-SM
(spectrogram, thicks, Cv measurement)
Spectrogram analysis
Self-optimization TC-TC, T-CON

Options
Fast action electronic main cylinder brake TC-CB
Extra special card wire TC-SW long life card wire (Graf)
MAGNOTOP magnetic flat system
TC-IK Packet for connecting NEPCONTROL TC-NCT on card with cable and software

Integrated draw frame IDF
2 zone drafting with autolevelling
pneumatic tension on top rollers
Continuous quality control (count, evenness, spectrogram, thicks).
automatic speed control based on card data
Drafting 3x
3 over 3 drafting self exhaust
Power rating 2.7kW

Can changer TC-C1000U
For cans 1000 mm. dia.

LC-M control system
Vents BR-R3
Electric cable BR-K for data transfer.
Autoleveller draw frames Truetzschler TD-03 YOM 2006 2 nos., YOM 2010 2 nos. (total 4 nos.)
Serial nos. YOM 2006 2 nos.: 8550003-113050, 8550003-113049
YOM 2010 2 nos. 8550005-140288 A, B
4 over 3 drafting with tension control
Input cans 1000 mm. dia.*1200 mm. ht.
Power creel for 8 round cans dia. 400, 450, 500, 600, 900 or 1000 ?? and height 1500 ??. Max.
Can changer for 3 cans dia. 400 mm. dia.* 920 mm. ht.
Currently working 200 Kgs./Hr.
Casing for optimal accessibility
Pneumatic continuously variable tension on each top roller.
Quick tension-removal on stoppage
Central suction for used air
Feed-in through rollers TD-PC
The digital drive in the drafting system and the individual drives of the creel (option) as well as of the can
changer allow for
stepless speed settings on the monitor of the draw frame control.
Due to the individual drives, stepless adjustment of the tension draft between creel and drafting system, and
coiler plate speed
(sliver coiling geometry in the can) is also possible.
delivery speeds of up to 1,000 m/min
power consumption is approx. 0.020