non woven- thermobond line

1 x FOR/Tomes/Asselin nonwoven line

Type: Thermo- and spraybonding line Width: 3300mm YOC: 1999-2001 EL: 380/3/50

For the production of resin and thermobonded and/or pre-needled material for waddings, mattresses, thermal and acoustic insulation and interlinings. Capacity: 500 kgs/hr with 6-25 denier fibers. 50-600 gsm run on the line. Speed max 20 met/min.Consisting of:

-03 Tecnotex bale-openers with weigh-pans, inlet conveyor of 2500 mm (on 2 machines), ww: 2,300 mm, with collecting belt and transport fan

-02 blending boxes

-01 carding willow pre-opener

-01 fine-opener with chute-feed, ww: 1000 mm

- auxiliary equipment for material handling, mixing and transportation

-01 dust collection unit

-01 volumetric card feeding unit

-01 FOR card, ww: 2500 mm, avantrain (with 3 w/s) + double cylinders and double doffers, condensing rollers at take off

-01 Tomes crosslapper, ingoing 2500 mm and outgoing 3800 mm, mechanical inlet speed 80 m/min, outlet speed 25 m/min. Double carriage with compensation rollers.

-01 x 4-cylinder horizontal web drafting unit, smooth rolls

-01 Asselin pre-needler, type HL 3300 down stroke, ww 3300 mm

- complete mixing set with feeding pump

-01 Tomes 8 chamber, 3-layer air circulating oven with 1 external heat exchanger of 1.250.000 kcal/hr, entry to oven with spraybox and exit with spraybox, both spray cabins with filtration units and exhaust, exit in cooling section and suction belt

-01 final slitting and take-up

The electrical system was fully redone in 2003 including motors.

Ref. No.BPMB41527