1 x OMMI bale opener
Type: CA300 Width: 2700mm YOC: 1993 EL: 380/3/50
capacity about 1500 kgs/hr, ingoing conveyor of 5800 mm.

1 x Asselin finishing needle loom
Type: A50XFRS-SD2 Width: 2900mm YOC: 2006 EL: 380/3/50
double board, 11, 560 needles/lm (with different configuration between board one and board two), downstroke, with CBF, max stroke frequency 1200/min, 60 mm hub, speed 20 m/min. Only worked for 34,000 hours.

1 x Laroche tearing machine/line
Type: Super Olympic Width: 1400mm YOC: 1989 EL: 380/3/50
6 cylinder tearing line, consisting of;
Pierret CT-60 cutter, yoc: 1989, ww: 500 mm, ingoing conveyor of 2 m.
Laroche tearing starting with feed tower and conveyor.
1st cylinder - 63000 pins - 75 kW motor
2nd cylinder - 75000 pins - 75 kW motor
3rd cylinder - 90000 pins - 75 kW motor
4th cylinder - 110000 pins - 75 kW motor
5th cylinder - 125000 pins - 75 kW motor
6th cylinder - 140000 pins - 45 kW motor
Capacity 750 kgs/hr for open-end spinning grade and could be up to 2000 kgs/hr for felt production grade.
Telemecanique PLC controls installed new in 2006 for the complete line.
Including dust-filtration unit.

1 x Spinnbau/Dilo complete nonwoven line
Type: Complete Needling Line Width: 2100mm YOC: 1968-1997 EL: 380/3/50
complete line for needle-punching. Very versatile line that can make several products such as filters, geotextile, automotive, etc...
Consisting of;
02 x Balkan bale-openers from 1997, ww: 900 mm, ingoing conveyor of 3200 mm, collecting conveyor of 4300 mm, going into
01 x Balkan carding willow from 1997, ww: 1000 mm with 4 workers/strippers
02 x Balkan blending chambers, each 4 x 4 x 5 meters (length x width x height)
01 x Spinnbau card with chutefeed, ww: 2500 mm, yoc: 1984, with licker-in, breast cylinder - dia 1000 mm with 4 workers/strippers, transfer cylinder - dia 550 mm, main swift - dia 1200 mm with 4 workers/strippers and single doffer - dia 900 mm. Take-off by comb.
New wires on breast section and main swift in April 2012.
01 x Hergeth crosslapper, yoc: 1982, ingoing 2500 mm and outgoing 2700 mm
01 x Dilo DI-TACK pre-needler, yoc: 1975, ww: 2500 mm with CBF, 5000 needles
01 x Dilo NFZ 22 DQ, yoc: 1968, double board, upstroke, 10,000 needles
01 x Dilo NFZ 25 DO, yoc: 1970, double board, downstroke, 10,000 needles
01 x slitter with two knives
01 x take-up winder
Capacity about 200 kgs/hr at 500 gsm. Line is suitable to work anything between 100 - 1000 gsm, polyester fiber 1.5 - 10 dTex, average fiber length 50 mm. Line has mainly been running regenerated polyester fiber.

Ref. No. BIB61245