1 x Fehrer Random Airlaid Card
Type: V21R/K12 Width: 3400mm YOC: 1986 EL: 380/3/50
Air laid card unit consisting of:
01 x Temafa material fan
01 x Temafa feeding silo from 1986
01 x Spinbau chutefeed
01 x Fehrer V21
01 x Fehrer K12

1 x Stork foam processor
Type: FP 2 Width: 2400mm YOC: 2004 EL: 380/3/50
Very little used including foam mixing unit type 300L.

1 x Asselin pre-needle loom
Type: A50 Width: 2600mm YOC: 1996 EL: 380/3/50
Pre- needler with bat feed, 1600 stroke frequency, hub 60 mm, 3000 needles/meter and speed appr. 20 m/min

1 x Asselin finishing needle loom
Type: SD26 Width: 2600mm YOC: 1991 EL: 380/3/50
Finishing needle loom type SD 26, stroke amplitude 1600, hub 60 mm, 2 x 7 500 boards, 200 needles/sqcm.

1 x Meca quilting machine
Type: Eco Rding Width: 1600mm YOC: 2003 EL: 380/3/50
Multi needle m/c in excellent condition

1 x Stutznecker quilting machine
Type: Mammuth Width: 4500mm YOC: 2007 EL: 380/3/50
Single needler with computer and software

1 x Fehrer/Fleissner complete nonwoven line
Type: V21/K12 Width: 2200mm YOC: 1993-2005 EL: 380/3/50
Complete nonwoven line for making wadding products between 80 - 600 gr/sqm, Speed from 5 - 25 meters depending on products manufactured, basically for PE regenerated fibers with melt fibers consisting of:
03 x Falubasz weighhopper feeders each with feedtable and pneumatic weighing system-93
01 x Collecting belt for the weighhopper feeders as well as 2 return channels from (card and side cut) waste in production
01 x Falubasz carding wolf used for mixing of fibers
01 x Falubasz material fan to fiber mixing chamber
01 x Falubasz 6 chamber mixing unit type MW6 from 2000 with material fan
01 x B. Mailinger silo and material feed type RSP from 2002 to V21 unit
01 x Kukla wagen measuring system type E-DBW-A from 2004 connected to feed belt for K12 unit
01 x Fehrer webforming card unit type V21/R from 2004
01 x Fehrer K12 card unit with adjustable width settings and suctions device for swift return of excess fibers into the fiber opening system
01 x Fleissner gasheated (15 qbm/hr) oven type Vario air, TVZ22/HG/AZ for 2 chambers with Termotec type TE 1.1 burners and Venta curculating fan motor system, 1 chamber cooling area type KZVU21/KS all from 2005
01 x Finishing treatment section with 4 cylinders of which 2 are for further heatsetting thermal oil heated and 2 are for cooling. The system can be set in 3 different operations depending on request for finished products.
01 x Amdes accumulator, length cutting, crosscutting and winding
01 x Wadding compactor
01 x Airpool compressor with dryer to serve the requested airconsumption for the line.
All is in top class condition.

1 x Laroche/Befama/Asselin/Mohr complete nonwoven line
Width: 2200mm YOC: 1986-1999 EL: 380/3/50
Complete nonwoven wadding line for products between
02 x Laroche bale breakers with feedtable1.2 x 3.0 m and pneumatic weighing devices
01 x Fakubasz carding wolves with 3 workers/strippers for waste opening
01 x collecting belt for the fibers including a return feed from waste in the line including a mixer
01 x Laroche fineopener with condensor and material fan
01 x Befama card from 1989, w.w. 2,2 m consisting of Feeding silo, weighhopper feeder, compression cylinder, avantrain, 1st cylinder with 6 w/s and 2nd cylinder with 6 w/s and 1 doffer with random fiber arrangement (roller take off)
01 x Asselin crosslapper type 360 from 1999 ingoing 2,5 and outgoing 2,5 m, speed 60 m/min
01 x Spinbau drafter from 1989 with 9 - 11 cylinders (top and bottom)
01 Mohr 2 chamber steamheated oven from 1989 with 2 spraycabins for both sides, max temperature 140 degrees, speed 10-20 m/min depending on product processed.
01 winding and cutting unit for both length and crosscutting.

1 x Hergeth/Spinnbau/Küsters/Edelmann complete nonwoven line
Type: Complete thermobonding line Width: 3500mm YOC: 1989/1993/1998 EL: 380/3/50
Thermobonding line making PP material of 18 - 40 grams/sqm, running 160 m/min, production average 500 kgs/hr on 23 gsm.
Rawmaterial staplefibers 38-40 mm of 2 Dtex consisting of :
01 Hergeth SML 6-chamber mixer, ww: 2000 mm, length 3600 mm, yoc: 1989
01 Hergeth MTO/S fine-opener with feeding silo, ww: 1250 mm, yoc: 1992
01 Hergeth TV-300/4S material transport fan, yoc: 1985
01 Hergeth MC/W Masterchute chutefeed, yoc: 1989 with SK airpressure control from 1993
01 Spinnbau card, yoc: 1993, with licker-in, breast w/ 1 worker/stripper, single main cylinder with 5 workers/strippers, doffer with randomizing rollers and condensor take off system (see sketch on photo).
01 Transport belt with edgetrimming and vacuum transfer cylinder into the calander
01 Küsters 2-cylinder calander, yoc: 1993 with 1 S-roll and 1 roll engraved. Thermal oil heated including pumps and motors but excluding boiler. Exit in water cooled roll.
01 Edelman 640.015 slitter/winder, yoc: 1984, 12 knives fitted but provision for 40. Upgraded with Siemens Simatic Plc system, minimum slitting width 35 mm, core dia 76 mm including load table and 2 sets of steel cores for continuous changing.

Ref. No. BIB51245