1 x Tomes/FOR/Fehrer complete nonwoven line
Type: Complete Needling Line Width: 3300mm YOC: 1980-2005 EL: 380/3/50
for the production of needle-punch material for automotive products, carpet backing and geotextile. Capacity upto 200 kgs/hr with 3-6
denier fibers, 80-400 gsm run on the line. Consisting of:
- 03 Tecnotex bale-openers with weighpans, completely modified by Tomes in 2003, inlet conveyor of 2500 mm, ww: 1000 mm, with collecting belt, spiked cylinder and transportation fan.
- 01 Bonino fine-opener consisting of an upper chute-feed, ww: 1000 mm that is feeding the opener, ww: 1200 mm
- 01 Tomes volumetric chute-feed, yoc: 2003, ww: 2500 mm
- 01 pre-opening card, ww: 2500 mm. Orginally made by FOR and then modified, inlet cylinder - dia 800 mm, main swift with workers/strippers, single doffer and take-off by comb.
- 01 transport unit
- 01 FOR card, ww: 2500 mm, double cylinders and double doffers
- 01 Tomes crosslapper, yoc: 2003, ingoing 2500 mm and outgoing 3800 mm, mechanical inlet speed 80 m/min, outlet speed 25 m/min. Double carriage with compensation rollers.
- 01 x 4 cylinder drafting unit - mechanically fixed smooth rolls
- 01 x 2N pre-needler, single board, inlet with belt pressing system, 700 strokes/minute
- 02 Fehrer NL21 needle-looms, ww: 3300 mm, 1000 strokes/minute
- 01 final slitting and take-up unit
The electrical system was fully redone in 2003 including motors.

1 x FOR/Tomes/Asselin complete nonwoven line
Type: Thermo- and spraybonding line Width: 3300mm YOC: 1999-2001 EL: 380/3/50
For the production of resin and thermobonded and/or pre-needled material for waddings, mattresses, thermal and acoustic insulation and interlinings. Capacity: 500 kgs/hr with 6-25 denier fibers. 50-600 gsm run on the line. Consisting of:
-04 Tecnotex bale-openers with weigh-pans, inlet conveyor of 2500 mm (on 2 machines), ww: 1000 mm, with collecting belt and transport fan
-01 pre-opener
-01 fine-opener with chute-feed, ww: 1000 mm
-02 blending boxes
- auxiliary equipment for material handling
-01 dust collection unit
-01 volumetric card feeding unit
-01 FOR card, ww: 2500 mm, breast section + double main swifts and single doffer
-01 Tomes crosslapper, ingoing 2500 mm and outgoing 3800 mm, mechanical inlet speed 80 m/min, outlet speed 25 m/min. Double carriage with compensation rollers.
-01 x 4-cylinder web drafting unit, smooth rolls
-01 Asselin pre-needler, ww 3300 mm
- complete mixing set with feeding pump
-01 Tomes 3-layer oven with external heat exchanger of 1.250.000 kcal/hr, entry to oven with spraybox and exit with spraybox, both spray cabins with filtration units and exhaust, exit in cooling section and suction belt
-01 final slitting and take-up
The electrical system was fully redone in 2003 including motors.

1 x Bonino/Tomes complete nonwoven line
Type: Thermobonding line Width: 3000mm YOC: 1996-1998 EL: 380/3/50
for the production of high-loft nonwoven products such as waddings, mattresses, furniture filling, thermal and acoustic insulation.
Throughput around 600 kgs/hr with 6-75 denier fibers at 500 - 4500 gsm. Consisting of;
03 Bonino baleopeners, ww: 1000 mm
01 mixing opener, ww: 1000 mm
01 Bonino carding willow, ww: 1000 mm
01 mixing box
01 chute-feed with mechanical weighing
01 Bonino carding machine, ww: 3500 mm
01 Tomes crosslapper, ingoing 3500 - outgoing 3500 mm
01 lamination device for textile support to the nonwoven fabric (can be by-passed)
01 Tomes single passage - double belt thermobonding oven with cooling section and calibration unit including natural gas burner of 550.000 kcal/hr and external air circulation
01 slitting device with circular knives for slitting of high density materials
01 cutting and winding unit

1 x FOR/Tomes/Meca complete nonwoven line
Type: Thermobonding line Width: 3000mm YOC: 1993-1994 EL: 380/3/50
for light to medium weight thermobonded nonwoven products such as waddings, mattresses, furniture fillings, quilts and thermal and acoustic insulation. Throughput of 400 kgs/hr with 6 - 25 denier fiber, 100 - 1000 gsm, thickness up to 100 mm. Consisting of;
02 OMMI bale-openers, ww: 2000 mm
01 mixing/opener
01 FOR carding willow
02 mixing boxes
01 Bonino chute-feed with mechanical weighing, ww: 2500 mm
01 FOR card, ww: 2500 mm
01 Tomes crosslapper, ingoing 2500 mm and outgoing 3300 mm
01 lamination device for textile carrier support material
01 Tomes single pass thermobonding oven with cooling section with natural gas burner
01 Meca stitching machine with 20 needles
01 slitting, cutting and take-up system

Ref. No. BIB91217